BTMYB - EPOXY KIT #1 (EK-1)-RESIN, PT A
- MSDS: BTMYB
- Manufacturer: I T W DEVCON INDUSTRIAL CORP
- Product Name: EPOXY KIT #1 (EK-1)-RESIN, PT A
- National Stock Number: 8010-00-233-6185
Product Identification
Product ID:EPOXY KIT #1 (EK-1)-RESIN, PT A
MSDS Date:10/01/1985
FSC:8010
NIIN:00-233-6185
MSDS Number: BTMYB
Responsible Party
DANVERS, MA 01923
US
Emergency Phone: 508-777-1100
Info Phone: 508-777-1100
Cage: JO305
Contractor
Telephone: 508-777-1100
Cage: JO305
Ingredients
NON HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) 11.4 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST/INHAL:NO DATA.
EYE/SKIN:MILD IRRITATION. CHRONIC:APPROXIMATELY 1% OF WORKERS ARE
POTENTIALLY SKIN SENSITIZABLE. THIS INFO APPLIES TO RESIN ONLY.
WHEN MIXED W/HARDENER, FOLLOW HAZARD INFO FOR HARDENER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS
DIFFICULT. GET MED ATTN. INGEST:DO NOT INDUCE VOMITING. ADMINISTER
2 GLASSES OF WATER. GET MED ADVICE. EYES:FLUSH WITH WATER FOR AT
LEAST 1 5 MINUTES. GET MED ATTN. SKIN:WASH WITHSOAP AND WARM WATER.
GET MED ATTN IF IRRIT DEVELOPS.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:CO*2 OR DRY CHEMICALS. POLYMER FOAMS FOR LARGE
FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PREVENT SKIN & EYE CONTACT. SCRAPE UP &
DISCARD IN SUITABLE CONTNRS. USE ABSORBENT MATL IF NECESSARY. WASH
SPILL AREA WITH AN INDUSTRIAL CLEANING AGENT. IF A SOLVENT IS USED
FOR CLEANING TAKE PRECAUTI ONS AGAINST FIRE & PERSONAL
OVEREXPOSURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE IN
ACCORDANCE WITH THE POTNTL HAZ OF THE CURING AGENT USED.
Other Precautions:DESTROY LEATHER ARTICLES, INCLUDING SHOES THAT CANNOT
BE DECONTAMINATED. IF CURED MATERIAL IS SANDED/MACHINED, USE PROPER
PRECAUTIONS. WEAR ADEQ PROT EQUIP TO PREVENT OVEREXPOS TO NUISANCE
PARTICULATE S.
Exposure Controls
Respiratory Protection:NONE REQ AT NORMAL HANDLING TEMPERATURES.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST VENT IS RECOMMENDED FOR CONFINED AREAS.
GENERAL VENT IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEM RESISTANT RUBBER GLOVES.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:OTHER PROT CLTHG AS REQD TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:REMOVE CONTAM CLTHG & PROT GEAR. LAUNDER/CLEAN
BEFORE RE-USE. WASH THORO AFTER USING-PARTICULARLY BEFORE
EATING/SMOKING.
Supplemental Safety and Health
PH:7.0 (5% WT IN H*20). OTHER PREC:WEAR ADEQUATE PROTECTIVE EQUIPMENT
TO PREVENT OVEREXPOSURE TO NUISANCE PARTICULATES.
Chemical Properties
Vapor Pres:NIL @78F
Vapor Density:>1 (AIR=1)
Spec Gravity:1.98
pH:SUPDAT
Solubility in Water:NIL
Appearance and Odor:WHITE PASTE; LOW ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:OPEN FLAME AND EXCESSIVE HEAT. HEAT IS
GENERATED WHEN MIXED W/EPOXY HARDENER. USE CAUTN WHEN MIXING LARGE
QUANTITIES.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES & ACIDS
FROM INCOMPLETE COMBUSTION.
Disposal
Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.